Hammer drills are a valuable instrument to have on hand for a variety of do-it-yourself projects. Masonry is one of the materials that a conventional drill may not be able to penetrate, but a hammer drill can. Despite this, many hammer drills feature a mode that allows the heavy-duty hammer action to be turned off, allowing it to be used as a regular drill. So, they are meant for more than just heavy-duty purposes as they are essential tools; that is why, with the other hand tools supplier in UAE, you should keep them in your toolbox.

But if you are using the hammer drill tool for the first time, here are some tips you should follow to help you use it safely.

Tips For Using Hammer Drill

Do Not Reverse

Stop the hammer drill if you need to change direction. Never try to turn the hammer drill the other way while it’s still running.

Fit the Bit

Put on protective goggles first to avoid putting dust in your eyes, and then adjust the drill bit. To expand the size of the hole, you should always start with a minor drill bit and drill a little hole first. Then, you should replace it with a more significant bit and drill the hole once more.

Check Chuck Tightness

To ensure precise and safe drilling, securely tighten the drill bit in the chuck before operation. An adequately tightened bit prevents imprecise drilling and protects the bit and the drill from potential damage. Whether it’s a portable hardness tester Supplier in Dubai UAE or even a hammer drillif you cannot use it properly, then it is useless.

Wear PPE

You should wear personal protective equipment (PPE) when operating a hammer drill. PPE is necessary for any power equipment, and hammer drills are no different. Dust masks, impact-resistant glasses, and thermal protection are crucial PPE items for hammer drills.

Always Clean the Hole

Make sure to stop drilling every 15 seconds to remove the bit and clean the hole of any dust. After you’re done, you can blast away any leftover debris by forcing pressurized air into the hole.

The Air Vent Should Be Sealed

Ascertain that the hammer drill’s air vents are always free and clear. There are usually one or more air vents on hammer drills. If you let debris build up on these air vents, the hammer drill can get damaged, putting you in danger. When using a hammer drill, ensure the air vents are always transparent.

The Bit Should Be Lubricated

When drilling into hard materials, lubricate the drill bit with an appropriate lubricant. This can extend the bit’s life and boost functionality.

Avoid Excessive Vibration

When using a hammer drill, it’s crucial to ensure that the anti-vibration features work properly. This is because excessive vibration can cause discomfort and fatigue during extended use. Therefore, it’s essential to check the functionality of these features so that you can use the hammer drill confidently and without any inconvenience.

By implementing these tips, you will be able to confidently and effectively use a hammer drill, ensuring your and the tool’s precision, longevity, and safety.