• FEATURES

    • Very useful tool for bearing work and for gaging slots
    •  Made of quality tool steel and accurately tapered throughout entire length for quick and convenient measuring
    •  11mm (7/16") wide by 160mm (6-1/4") long
    •  Can be used as a precision shim
    •  One side graduated from .010" to .150" in thousandths of an inch;

    SPECIFICATIONS

    • Range (in): 010-.150"
    •  Range (mm): 0.3-4mm
    •  Graduations (in): .001"
    •  Graduations (mm): 0.05mm
    •  Length (in): 6-1/4"
    •  Length (mm): 160mm
  • These hole attachments make it possible to measure the inside of holes and other surfaces that cannot be reached with the regular indicator spindle. Both attachments have a 9.5mm (.375") diameter hole to fit all indicators made to AGD standards and can be securely clamped to the indicator stem. The ball end on the swivel arm which contacts the work is 3mm (1/8") in diameter. 14mm (9/16”) Range.

    FEATURES

    • Range (Approx.) 14mm (9/16")
    •  For Hole Depths to: 42mm (1-11/16")

    SPECIFICATIONS

    • Range (Approx.) 9/16" 14mm
  • The Starrett 671 Universal Attachment is for use with indicators having standard AGD .375" (9.5mm) stem diameters.  

    FEATURES

    •  Two interchangeable arms, one straight for measuring internal surfaces and one angular for measuring at right angles to the indicator spindle
     

    SPECIFICATIONS

    •  Range (Approx.) 1/8" (3mm)
  • Ideal gage for checking bearing alignment or shaft deflection without dismantling the engine. Also useful as a strain gage on engine frames. This inside measuring gage checks the distortion of crankshaft webs and bears a direct relation to existing misalignment or excessive bearing wear. Used on all diesel engine shafts and center crankshafts on any type of engine or compressor, the gage can also be applied as a strain gage on engine frames while the engine is operating. A comparison of readings taken at top and bottom positions indicates any misalignment of cylinder and frame which results in local over-stress and eventual cracking of the frame neck. Gage with Balancing Attachment, 61-458mm Range neck.
     

    FEATURES

    • The dial indicator movement is approximately 5/32" (4mm) and with rods and extension, provides a range from 2 3/8-18" or 61-458mm
    •  There are 10 rods and one extension furnished
    •  Rods are marked to designate the approximate overall length of the gage
    •  Indicator has a movable bezel to adjust the dial in relation to the hand and a non-breakable crystal
    •  Designed in collaboration with Hartford Steam Boiler. Gage is used by their inspectors to check the distortion of engine shafts and frames
     

    SPECIFICATIONS

    • Type: Strain Gage
    •  Range (mm): 61 -458mm
    •  Graduations (mm): 0.02mm
    •  Dial Reading: 0-50-0 / 1mm Rev.
  • Ideal gage for checking bearing alignment or shaft deflection without dismantling the engine. Also useful as a strain gage on engine frames. This inside measuring gage checks the distortion of crankshaft webs and bears a direct relation to existing misalignment or excessive bearing wear. Used on all diesel engine shafts and center crankshafts on any type of engine or compressor, the gage can also be applied as a strain gage on engine frames while the engine is operating. A comparison of readings taken at top and bottom positions indicates any misalignment of cylinder and frame which results in local over-stress and eventual cracking of the frame neck. Gage with Balancing Attachment, 2 3/8-18” Range neck
     

    FEATURES

    • The dial indicator movement is approximately 5/32" (4mm) and with rods and extension, provides a range from 2 3/8-18" or 61-458mm
    •  There are 10 rods and one extension furnished
    •  Rods are marked to designate the approximate overall length of the gage
    •  Indicator has a movable bezel to adjust the dial in relation to the hand and a non-breakable crystal
    •  Gage is used by inspectors to check the distortion of engine shafts and frames
     

    SPECIFICATIONS

    •  Type: Strain Gage
    •  Range (in): 2- 3/8" to 18"
    •  Graduations (in): .001"
    •  Dial Reading: 0-20-0 / .040" Rev.
    • Starrett Yankee Calipers and Dividers are made from a high-grade steel and well-finished
    • The bow spring, although flexible, is exceedingly strong to assure reliability
    • All sizes are available with either spring nut or solid nut
    • The Starrett quick-adjusting automatic-closing spring nut is designed for making fast, positive adjustments
    • Fulcrum stud is hardened and has a smooth bearing surface
    • The legs are made of flat stock and are very durable
    • The threads of the nut firmly engage the screw at the slightest pressure from the leg
    • When the pressure is withdrawn, the nut automatically releases itself, sliding freely over the screw
  • Starrett 79A-12 Yankee Spring-Type Caliper, Outside, 12" Size and Capacity, Solid Nut, Flat Leg

    • Starrett Yankee Calipers and Dividers are made from a high-grade steel and well-finished
    • The bow spring, although flexible, is exceedingly strong to assure reliability
    • All sizes are available with either spring nut or solid nut
    • The Starrett quick-adjusting automatic-closing spring nut is designed for making fast, positive adjustments
    • Fulcrum stud is hardened and has a smooth bearing surface
    • The legs are made of flat stock and are very durable
    • The threads of the nut firmly engage the screw at the slightest pressure from the leg
    • When the pressure is withdrawn, the nut automatically releases itself, sliding freely over the screw
  • The Starrett 98 Machinists Level with Ground and Graduated Vial includes a cross test vial. 300mm (12") size, without case.

    FEATURES

    • Ground and graduated main vials
    •  The base of the levels features an involute groove running the length of the base, which provides a reliable seat for round work
    •  The base of the levels features an involute groove running the length of the base, which provides a reliable seat for round work
    •  Cross test vial
    •  The vials are adjustable to a positive setting and are housed in a satin finished brass tube with a friction-fit closing cover to prevent breakage
    •  Main level vials have graduations that are approximately 80-90 seconds or .005" per foot (0.42mm per meter)

    SPECIFICATIONS

    • Length (in): 12"
    •  Length (mm):300MM
  • The Starrett 98 Machinists Level with Ground and Graduated Vial. Does not include a cross test vial. 100mm (4") size, without case.

    FEATURES

    • These levels have ground and graduated main vials
    •  The base of the levels features an involute groove running the length of the base, which provides a reliable seat for round work
    •  These vials are adjustable to a positive setting and are housed in a satin finished brass tube with a friction-fit closing cover to prevent breakage.
     

    SPECIFICATIONS

    • Length (in): 4"
    •  Length (mm): 100mm
  • The Starrett 98 Machinists Level with Ground and Graduated Vial includes a cross test vial. 150mm (6") size, without case.

    FEATURES

    • These levels have ground and graduated main vials
    •  The base of the levels features an involute groove running the length of the base, which provides a reliable seat for round work
    •  These vials are adjustable to a positive setting and are housed in a satin finished brass tube with a friction-fit closing cover to prevent breakage.
     

    SPECIFICATIONS

    • Length (in): 6"
    •  Length (mm):150MM
  • The Starrett 98 Machinists Level with Ground and Graduated Vial includes a cross test vial. 200mm (8") size, without case.

    FEATURES

    • Ground and graduated main vials
    •  The base of the levels features an involute groove running the length of the base, which provides a reliable seat for round work
    •  The base of the levels features an involute groove running the length of the base, which provides a reliable seat for round work
    •  Cross test vial
    •  The vials are adjustable to a positive setting and are housed in a satin finished brass tube with a friction-fit closing cover to prevent breakage
    •  Main level vials have graduations that are approximately 80-90 seconds or .005" per foot (0.42mm per meter)

    SPECIFICATIONS

    • Length (in): 8"
    •  Length (mm):200MM
  • The Starrett Adjustable Parallel provides a wide range of use in layout, gaging, inspection work and for setups on various machine tools. Its adjustable feature makes it possible to adjust it to exact size by micrometer measurement and also permits use in place of several solid-type parallels. The parallel is useful as a gage in checking the size of slots and openings. It is also convenient for use in machine vises, for leveling or adjusting work on setups of milling and grinding machines, shapers, planers, drill presses and for many other applications. The parallel slides smoothly and can be easily adjusted. The smaller sizes A, B, and C, are locked by one screw while the larger sizes, D, E, and F, have two lock screws. The parallel is 9/32" (7mm) thick. SET of 6 Parallels, Sizes A/B/C/D/E/F in Case The parallel is 9/32" (7mm) thick

    FEATURES

    •  Adjustable feature makes it possible to adjust to exact size by micrometer measurement and also permits use in place of several solid-type parallels
    •  These parallels are useful as gages in checking the size of slots and openings
    •  Convenient for use in machine vises, for leveling or adjusting work on setups of milling and grinding machines, shapers, planers and drill presses
    •  Parallels slide smoothly and can be easily adjusted
    •  All parallels are 9/32" (7mm) thick
     

    SPECIFICATIONS

    • Length (in): 1-3/4",2-1/8",2-11/16",3-9/16"
    •  Length (mm): 45mm,55mm,70mm,90mm
    •  Range (in): 3/8" to 1-5/16"
    •  Range (mm): 9.5mm to 33mm
    •  Thickness (in): 9/32"
    •  Thickness (mm): 7mm
     

Go to Top