-
- Hammertone, baked-enamel-finished - With a standard bar except for 0-25mm frame model. - Ratchet Stop for exact repetitive readings.
-
• IP65 water/dust protection (Series 395). • Designed to measure the wall thickness of various tubing. • With Ratchet Stop for constant force. • With SPC output (Series 395). • With digit counter (Series 295). • With a standard bar except 0 -1" and 0 - 25mm model. • Supplied in fitted plastic case.
-
- Satin-chrome-finished frame, tapered (on the anvil side) for hard-to-reach places. - With a standard bar except for 0 - 1" models. - Supplied in fitted plastic case.
-
- The anvil and the spindle have a blade for measuring the groove diameter of shafts, keyways, and other hard-to-reach areas. - With Ratchet Stop for constant force. - Speedy spindle feed of .4"/10mm /rev. (Quickmike type). - With a standard bar except 0 - 1" and 0 -25mm model. - Supplied in fitted plastic case.
-
- Wide range of measurement with interchangeable anvils - Ratchet stop for constant force - Zero-setting Standards - Supplied in fitted wooden case
-
- Carbide measuring faces - Clear graduations on satin chrome finish and easy to read digit counter - Supplied in fitted plastic case
-
- Ratchet stop for constant force - Measures thickness of sheet metal, paper, plastic and rubber parts - Supplied in fitted plastic case
-
- Zero reference point can be adjusted - Stain chrome finished scales for glare-free reading - Extra-large base for rigidity - Optional magnifier for easier reading - Carbide-tipped scriber provided
-
- Easy and error-free reading with dual counters - Feed wheel - Carbide-tipped scriber
-
- Easy-to-use standard type - Provided with Carbide-tipped scriber - Double-column structure that ensures high measuring accuracy - SPC data output
-
Mitutoyo 530 Sseries Standard Vernier Caliper: Precision Measuring Excellence
- Versatile tool for measuring OD, ID, depth, and steps
- Small 14-degree vernier face angle for effortless reading
- Secure sliding jaw position with a reliable lock screw
- Carbide-tipped jaw option available for enhanced durability
- Conveniently includes a vinyl holster (carton for 600mm models) and a wooden case for the 1000mm model
-
- Can measure OD (outside diameter), ID (inside diameter), depth, and steps - The small vernier face angle (14°) provides easy reading - Lock screw for holding the sliding jaw position - Metric/inch dual scale - Supplied with vinyl holster in fitted carton
-
- New designed dial for smooth sliding and shock protection - Measures outside, inside, depth and steps - Lock screw for holding position - Supplied in fitted plastic case
-
- Hardened and Micro-lapped measuring faces - Has fine adjustment
-
- Easier and faster reading dial - Made of hardened stainless steel - Micro-lapped and hardened base and measuring face
-
- Absolute Encoder ensures all settings and readings maintained for the life of the battery (even when the power is turned off) - Base and measuring faces are hardened and micro-lapped - With SPC data output - 20,000 Hour battery life under normal conditions - Slider lock screw
-
FEATURES
- Accurate and reliable,Simple to operate ,Rugged, with few moving parts ,Smooth in operation For full use, the operator first chooses the proper contact from the three hardened contact points that come with each model ,Shank diameter is 1/4" (6.3mm) Attachments include clamp, tool post holder, snug and hole attachment In Case
SPECIFICATIONS
- Range (in): .200"
- Graduations (in): .001"
- Dial Reading: 0-100
- Attachments: Indicator with 3 Contact Points, Adaptor, 4 Attachments* in Case
- Dial Color: White
-
FEATURES
- These gages are for determining hole sizes in dies and all kinds of other work
- Quick, accurate measurement of hole and slot sizes
- Made of tempered steel with a locking device for fixing any leaf in position for use
- .100-.500
SPECIFICATIONS
- Range (in): .100-.500"
- Length (in): 2-1/2"
- Number of Leaves: 8
-
FEATURES
- These gauges are for determining hole sizes in dies and all kinds of other work
- Quick, accurate measurement of hole and slot sizes
- Made of tempered steel with a locking device for fixing any leaf in position for use
- .500-1"
SPECIFICATIONS
- Range (in): .500-1"
- Length (in): 2-3/4"
- Number of Leaves: 10
-
FEATURES
- Very useful tool for bearing work and for gaging slots
- Made of quality tool steel and accurately tapered throughout entire length for quick and convenient measuring
- 11mm (7/16") wide by 160mm (6-1/4") long
- Can be used as a precision shim
- One side graduated from .010" to .150" in thousandths of an inch;
SPECIFICATIONS
- Range (in): 010-.150"
- Range (mm): 0.3-4mm
- Graduations (in): .001"
- Graduations (mm): 0.05mm
- Length (in): 6-1/4"
- Length (mm): 160mm
-
These hole attachments make it possible to measure the inside of holes and other surfaces that cannot be reached with the regular indicator spindle. Both attachments have a 9.5mm (.375") diameter hole to fit all indicators made to AGD standards and can be securely clamped to the indicator stem. The ball end on the swivel arm which contacts the work is 3mm (1/8") in diameter. 14mm (9/16”) Range.
FEATURES
- Range (Approx.) 14mm (9/16")
- For Hole Depths to: 42mm (1-11/16")
SPECIFICATIONS
- Range (Approx.) 9/16" 14mm
-
The Starrett 671 Universal Attachment is for use with indicators having standard AGD .375" (9.5mm) stem diameters.
FEATURES
- Two interchangeable arms, one straight for measuring internal surfaces and one angular for measuring at right angles to the indicator spindle
SPECIFICATIONS
- Range (Approx.) 1/8" (3mm)
-
Ideal gage for checking bearing alignment or shaft deflection without dismantling the engine. Also useful as a strain gage on engine frames. This inside measuring gage checks the distortion of crankshaft webs and bears a direct relation to existing misalignment or excessive bearing wear. Used on all diesel engine shafts and center crankshafts on any type of engine or compressor, the gage can also be applied as a strain gage on engine frames while the engine is operating. A comparison of readings taken at top and bottom positions indicates any misalignment of cylinder and frame which results in local over-stress and eventual cracking of the frame neck. Gage with Balancing Attachment, 61-458mm Range neck.
FEATURES
- The dial indicator movement is approximately 5/32" (4mm) and with rods and extension, provides a range from 2 3/8-18" or 61-458mm
- There are 10 rods and one extension furnished
- Rods are marked to designate the approximate overall length of the gage
- Indicator has a movable bezel to adjust the dial in relation to the hand and a non-breakable crystal
- Designed in collaboration with Hartford Steam Boiler. Gage is used by their inspectors to check the distortion of engine shafts and frames
SPECIFICATIONS
- Type: Strain Gage
- Range (mm): 61 -458mm
- Graduations (mm): 0.02mm
- Dial Reading: 0-50-0 / 1mm Rev.
-
Ideal gage for checking bearing alignment or shaft deflection without dismantling the engine. Also useful as a strain gage on engine frames. This inside measuring gage checks the distortion of crankshaft webs and bears a direct relation to existing misalignment or excessive bearing wear. Used on all diesel engine shafts and center crankshafts on any type of engine or compressor, the gage can also be applied as a strain gage on engine frames while the engine is operating. A comparison of readings taken at top and bottom positions indicates any misalignment of cylinder and frame which results in local over-stress and eventual cracking of the frame neck. Gage with Balancing Attachment, 2 3/8-18” Range neck
FEATURES
- The dial indicator movement is approximately 5/32" (4mm) and with rods and extension, provides a range from 2 3/8-18" or 61-458mm
- There are 10 rods and one extension furnished
- Rods are marked to designate the approximate overall length of the gage
- Indicator has a movable bezel to adjust the dial in relation to the hand and a non-breakable crystal
- Gage is used by inspectors to check the distortion of engine shafts and frames
SPECIFICATIONS
- Type: Strain Gage
- Range (in): 2- 3/8" to 18"
- Graduations (in): .001"
- Dial Reading: 0-20-0 / .040" Rev.
-
The Starrett 98 Machinists Level with Ground and Graduated Vial. Does not include a cross test vial. 100mm (4") size, without case.
FEATURES
- These levels have ground and graduated main vials
- The base of the levels features an involute groove running the length of the base, which provides a reliable seat for round work
- These vials are adjustable to a positive setting and are housed in a satin finished brass tube with a friction-fit closing cover to prevent breakage.
SPECIFICATIONS
- Length (in): 4"
- Length (mm): 100mm
-
The Starrett 98 Machinists Level with Ground and Graduated Vial includes a cross test vial. 300mm (12") size, without case.
FEATURES
- Ground and graduated main vials
- The base of the levels features an involute groove running the length of the base, which provides a reliable seat for round work
- The base of the levels features an involute groove running the length of the base, which provides a reliable seat for round work
- Cross test vial
- The vials are adjustable to a positive setting and are housed in a satin finished brass tube with a friction-fit closing cover to prevent breakage
- Main level vials have graduations that are approximately 80-90 seconds or .005" per foot (0.42mm per meter)
SPECIFICATIONS
- Length (in): 12"
- Length (mm):300MM
-
FOR MEASUREMENTS OF: 0.001″ to 0.007″ (0.025mm – 0.175mm)
CONTENTS: 100 gauges, measurement reading cards (mm & inches) & instructions
PLASTIGAUGE PL-A is widely used in the measurement of clearance in plain automotive bearings. Measurement of clearance in big-end bearings can be achieved without dismantling the crankshaft.
PLASTIGAUGE is a precision clearance gauge for the measurement of clearance (separation) between fitted surfaces. It is particularly useful for measuring clearances in split bearings or in situations where a feeler gauge cannot be inserted.
PLASTIGAUGE is particularly effective for the measurement of separation in moulding tools and wherever it is required to determine the separation between hidden surfaces.
PLASTIGAUGE may be used to detect high spots in cylinder heads, pipe flanges etc. It is useful in production, inspection and servicing.
-
FOR MEASUREMENTS OF: 0.004″ to 0.010″ (0.100mm – 0.250mm)
CONTENTS: 100 gauges, measurement reading cards (mm & inches) & instructions
PLASTIGAUGE is a precision clearance gauge for the measurement of clearance (separation) between fitted surfaces. It is particularly useful for measuring clearances in split bearings or in situations where a feeler gauge cannot be inserted.
PLASTIGAUGE is particularly effective for the measurement of separation in moulding tools and wherever it is required to determine the separation between hidden surfaces.
PLASTIGAUGE is a precision clearance gauge for the measurement of clearance (separation) between fitted surfaces. It is particularly useful for measuring clearances in split bearings or in situations where a feeler gauge cannot be inserted.
PLASTIGAUGE is particularly effective for the measurement of separation in moulding tools and wherever it is required to determine the separation between hidden surfaces.
PLASTIGAUGE may be used to detect high spots in cylinder heads, pipe flanges etc. It is useful in production, inspection and servicing.
-
FOR MEASUREMENTS OF: 0.007″ to 0.020″ (0.175mm – 0.500mm)
CONTENTS: 100 gauges, measurement reading cards (mm & inches) & instructions
PLASTIGAUGE is a precision clearance gauge for the measurement of clearance (separation) between fitted surfaces. It is particularly useful for measuring clearances in split bearings or in situations where a feeler gauge cannot be inserted.
PLASTIGAUGE is particularly effective for the measurement of separation in moulding tools and wherever it is required to determine the separation between hidden surfaces.
PLASTIGAUGE is a precision clearance gauge for the measurement of clearance (separation) between fitted surfaces. It is particularly useful for measuring clearances in split bearings or in situations where a feeler gauge cannot be inserted.
PLASTIGAUGE is particularly effective for the measurement of separation in moulding tools and wherever it is required to determine the separation between hidden surfaces.
PLASTIGAUGE may be used to detect high spots in cylinder heads, pipe flanges etc. It is useful in production, inspection and servicing.
-
FOR MEASUREMENTS OF: 0.020″ to 0.040″ (0.500mm – 1.00mm)
CONTENTS: 30 gauges, measurement reading cards (mm & inches) & instructions
PLASTIGAUGE is a precision clearance gauge for the measurement of clearance (separation) between fitted surfaces. It is particularly useful for measuring clearances in split bearings or in situations where a feeler gauge cannot be inserted.
PLASTIGAUGE is particularly effective for the measurement of separation in moulding tools and wherever it is required to determine the separation between hidden surface
PLASTIGAUGE is a precision clearance gauge for the measurement of clearance (separation) between fitted surfaces. It is particularly useful for measuring clearances in split bearings or in situations where a feeler gauge cannot be inserted.
PLASTIGAUGE is particularly effective for the measurement of separation in moulding tools and wherever it is required to determine the separation between hidden surfaces.
PLASTIGAUGE may be used to detect high spots in cylinder heads, pipe flanges etc. It is useful in production, inspection and servicing.
